Out Of Stock
Notify me when its in stockThe HT 6510F digital hardness tester shore meter is a device designed to measure the hardness of soft cellular materials. Precise measurements can be made with its large diameter presser foot.
HT 6510F is a shore meter designed for hardness measurement of soft materials (foam, styrofoam).
The device has a backlit LCD screen. Therefore, you can take measurements even in dark environments and see them comfortably.
The HT 6510F hardness measurement device has an automatic shutdown function. If no operation is performed with the device after the last operation, it will automatically shut down after 2 minutes.
You can set the calibration of the device with the "CAL" button.
You can use the "AVE" button to take the average of your measurements.
You can find the maximum of the values you measure with the "MAX" button.
You can use the "ZERO" button to reset the values on the screen.
You can turn the device on and off with the red and white button.
The HT 6510F hardness measurement device has a sturdy, durable, and very stylish metal case.
This hardness tester measures the thickness of materials with a minimum thickness of 25 mm. If the thickness of the material to be measured is less than 25 mm, 2-3 pieces are placed on top of each other to ensure measurement.
The device operates with 4 pieces of 1.5V AAA batteries.
Technical Specifications
Measurement Range: 0 - 100 HF
Resolution: 0.1 HF
Diameter of Measurement Pin: 25.2 mm
Presser Foot Diameter: 80 mm
Spring Force: 455 gf
Product Size: 162 x 65 x 28 mm
Weight: 490 grams
Power Source: 4 pieces of 1.5 volt AAA batteries
