Out Of Stock
Notify me when its in stockLX1010B light meter; a portable precision light meter device suitable for professional use.
It is used to measure and monitor light levels in forested areas, plant cultivation, contractor and engineer uses, photography, architecture, and lighting system installations.
Can be used in indoor and outdoor environments.
Measurement Ranges:
Can measure between 0 and 2,000 Lux.
Can measure between 2,000 and 20,000 Lux.
Can measure between 20,000 and 50,000 Lux.
Technical Specifications:
Maximum measurement capacity: 50,000 Lux.
The measurement sensor is independent of the device and is located separately; thus, the most accurate position for light measurement can be achieved.
With the Hold feature, the measured value can be fixed on the screen instantly.
The device uses new generation chips supported by scientific methods with low power consumption.
There is a 1-meter long spiral cable between the sensor and the device.
LSI circuit is used for high reliability and durability.
A protective cover is available to prevent wear on the sensor.
The low battery indicator informs the user when the battery is about to run out.
The device operates with 1 piece of 9V battery; the battery is not included in the box.
Box Contents:
Main unit consisting of sensor and device (connected to each other).
English user manual.
Note: Different light illumination values are used in different areas where people are present, depending on the activities.
TECHNICAL SPECIFICATIONS
Measurement Range : There is a selectable measurement range, measures up to a maximum of 50,000 lux
Weight : 200 grams
Dimensions :
Sensor: 100 × 60 × 26 mm
Main device: 118 × 70 × 30 mm
Power Source : 1 piece of 9V battery
Measurement Accuracy : ±(5% + 2d)
Operating Temperature : 0 ... +50 degrees
Cable Length : Extendable spiral cable up to 1 meter
Response Time : 0.4 seconds
Resolution :
1 Lux, up to 2,000 Lux
10 Lux, up to 20,000 Lux
100 Lux, up to 50,000 Lux
