LYK DT8016H Double Laser Laser Thermometer, 1600C

LYK DT8016H Double Laser Laser Thermometer 1600 Degrees

• LYK DT8016H laser thermometer comes with double laser lights for healthier and faster measurements.

• The thermometer has a blue backlight to facilitate easy measurements in low-light environments.

• The screen light and laser target light of the LYK DT8016H laser thermometer can be turned on and off as desired.

• The device will turn off after a period of inactivity to conserve power.

• The device can measure in either °C/°F units. (°C is used in Turkey.)

• The value appears on the screen within 0.5 seconds or less after the trigger is pressed.

• The MODE button allows features like HAL, LAL, MAX, MIN, AVG, EMS, etc., to be activated on the screen.

• The HAL feature shows the high alarm value set. If this value is exceeded, the device will alert with a sound.

• The LAL feature shows the low alarm value set. If this value is exceeded, the device will alert with a sound.

• With the AVG or Average feature, you can see the average of the temperature values read by the device while holding the button down.

• The DIF feature shows the difference between the maximum and minimum temperature values measured by the device.

• With the EMS feature, you can adjust the emissivity from 0.1 to 1.0 based on the brightness of the surface you are measuring for more accurate results.

• The box of this infrared thermometer includes a yellow carrying case.

TECHNICAL SPECIFICATIONS

• Laser Temperature Measurement Range : -50 degrees ... +1600 degrees

• Laser Temperature Sensitivity : ±2 degrees

• Screen Resolution : 0.1 degrees

• Target Ratio : 50:1

• Emissivity : Adjustable 0.10 - 1.00

• Screen : Blue backlit LCD screen

• Laser Light : Double laser

• Response Time : Less than 0.5 seconds

• Dimensions : 180 x 130 x 35 mm

• Weight : 242 grams

• Power Source : 1 piece 9V battery