Cem DT 1307 Solar Light Intensity Meter

Cem DT 1307 Solar Light Intensity Meter

• Cem DT-1307 solar light intensity meter; a solar light measurement device also called a solarimeter, is used to measure the amount of sunlight outdoors between 1999 W/m² or 634 BTU (ft²*h).

• With the Cem DT-1307 measuring device, solar light intensity can be measured precisely with high accuracy and fast response time.

• The Cem DT-1307 solar light level measuring device performs solar measurements between 1999 W/m² or 634 BTU (ft²*h). The desired unit for measurement can be selected with the W / B button.

• This solar light test device is a preferred measuring device in solar energy research, physics and optics laboratories, measuring window lighting performance, meteorology, and agriculture.

• The solar light intensity meter can perform measurements quickly without any adjustments.

• There is a HOLD function to fix the measured values on the screen. This feature can be activated with the HOLD button.

• The left side of the DT-1307 solarimeter device allows activating the screen illumination feature with the button that has a lamp symbol.

• With the MIN/MAX button on the left side of the device, the lowest and highest values measured by the device can be seen on the screen.

• Calibration discrepancies that may occur from attaching and detaching the probe cap can be adjusted with the 0ADJ section. Adjustments should be made with a flat screwdriver until the value on the screen reaches 00.0.

• This light level measuring device has a low battery indicator on the screen.

• Inside the box of the DT-1307 solar light intensity meter, you will find the device and its sensor, 3 AAA batteries, an English user manual, and a cloth carrying case.

TECHNICAL SPECIFICATIONS

• Measurement Range : 1999 W/m² or 634 BTU (ft²·h)

• Display Resolution : 1 W/m², 1 BTU (ft²·h)

• Display : LCD screen

• Weight : 176 grams

• Dimensions : 162 x 63 x 28 mm

• Power Source : 3 x 1.5 V AAA batteries

• Measurement Accuracy : ±10 W/m² (±3 BTU) or ± %5

• Response Time : Approximately 0.25 seconds

• Measured Units : W/m², BTU (ft²·h)

• Operating Temperature and Humidity : 5 °C … +40 °C, below 80% humidity

• Storage Temperature and Humidity : -10 °C … +60 °C, below 70% humidity