Elitech Tlog 10 Temperature Data Logger, Precision

Tlog 10 Temperature Data Logger | Precision

• Elitech Tlog 10 temperature data logger has the feature of quickly generating document reports in pdf format.

• It is quite easy to obtain results; the pre-configured device is plugged into the computer via USB. Results are reviewed by clicking on the pdf report that opens within the My Computer folder automatically.

• Various settings of the Elitech Tlog10 datalogger device can be configured through its software, which can be downloaded for free by clicking the button below.

• The design of the Tlog10 recorders includes an LCD screen and two buttons.

• Elitech Tlog 10 series temperature data loggers can be started by pressing the button or through PC software, while stopping the recordings can be done by pressing the button, through PC software, or by automatic stopping.

• Without connecting the device to the computer, you can view the device status, various parameters, and edit the parameters and modes.

• The Tlog 10 temperature datalogger device has a significant precision of ±0.5°C.

• The recording memory of the Elitech Tlog10 temperature data logger has been increased to 32,000 compared to other models.

• Battery and life of the Elitech TLlog10 series have been renewed and can generally be used for 2 years.

• The red and green colors on the datalogger have specific meanings. For example, when the start button is pressed and held for 5 seconds, the red and green colors flash 5 times and the recording starts, or when the stop button is pressed and held for 5 seconds, the colors flash 5 times and the recording stops. These lights have many meanings like this.

• The buttons of the Elitech temperature data logger are manufactured to be resistant to external influences.

TECHNICAL SPECIFICATIONS

• Temperature Measurement Range: -30°C ... +70 degrees

• Temperature Accuracy: ±0.5 degrees

• Temperature Resolution: 0.1 degrees

• Memory Capacity: 32,000 units

• Adjustable Recording Intervals: Between 10 seconds and 24 hours

• Alarm Feature: Alarm exists but alarm values can only be viewed from the pdf document. For 3 high values, for 2 low values

• Ability to Switch °C/°F Units: Available

• Recording Mode: Stop when full___Cyclic recording

• Protection Class: IP65

• Display: LCD

• Dimensions: 97 mm x 43 mm x 12.5 mm

• Weight: 45 g

• Power Source: 1 CR2450 battery

• Package Contents: Tlog10 Datalogger, CR2450 battery (included), Factory test certificate, User manual