Out Of Stock
Notify me when its in stockThe Linshang LS110A measuring device; is a light transmittance tester that simultaneously measures and displays the light transmission and light blocking capabilities of glass or glass film surfaces.
With this device, you can measure in one go how much ultraviolet radiation (UVR), infrared radiation (IRR) is blocked and how much visible light (VLT) passes through materials such as glass, window film, or sun protection film.
Place the sample you want to measure (for example, glass or film) between the main part and the auxiliary part, aligning the laser point target. The device will display the light transmittance values of the sample on the screen.
The LS110A is one of the preferred products in its category.
The device consists of two parts: the main part (PART I) displays the screen and measurement results; the auxiliary part (PART II) contains the light source and laser alignment system.
The two-part design facilitates light transmittance measurement of surfaces such as automobile windshields and building glass, providing an advantage over single-piece measuring devices.
It can simultaneously measure and display UV rejection, IR rejection, and visible light transmittance values on the screen.
The laser alignment feature ensures proper positioning of the main and auxiliary parts, thus increasing measurement accuracy.
You can quickly test the performance of automotive window films or building solar control films in blocking solar heat and harmful UV rays.
During material selection, it offers the ability to identify which glass or film provides the best protection and optimizes heat and UV blocking without reducing light transmittance.
Manufacturers and sellers can use this device to prove the technical claims of their products.
You can check compliance with regulations by measuring the required transmittance rates in vehicle or building glass using this device.
The device uses a built-in lithium rechargeable battery, allowing long-term use without frequent battery replacements.
When in measurement mode, a short press of the "HOLD" button freezes the measurement values, and the "HOLD" icon appears; pressing it again releases the freeze.
When the device parts are connected or disconnected, a 10-15 second SELF-TEST (pre-operation test) runs; this must be completed before measurement.
Package contents: LS110A (2 parts), charging adapter, USB cable, user manual, manufacturer test certificate, hard carrying case.
How Does the LS110A Work?
Main part (PART I): Collects, evaluates, and displays measurement results on the screen.
UVR - UV Peak Wavelength: 365 nm
IRR - IR Peak Wavelength: 940 nm
VLT - Visible Light Range: 380-760 nm (Compliant with CIE photopic brightness function)
Accuracy: ± 2% (for colorless and transparent materials)
Test Sample Measurement Area: 40 x 40 mm
Package Contents: LS110A (2 parts), charging adapter, USB cable, user manual, manufacturer test certificate, hard carrying case
Device Dimensions: 130 mm x 70 mm x 84 mm
Plastic Case Dimensions: 250 mm x 210 mm x 70 mm
Power Supply: Built-in lithium rechargeable battery
Weight: 630 grams
