Out Of Stock
Notify me when its in stockFLY 5000 digital scale has a precision of 0.01 gr, allowing you to perform your weighing operations with utmost accuracy.
The digital scale has an RS 232 output at the back. However, this port is non-functional as it does not meet country standards.
The digital scale has a 17 x 14 cm stainless steel pan and a quality load cell structure. Thanks to this quality load cell, you can get the same performance measurement result from all four corners of the pan.
FLY 5000 precision scale has a built-in rechargeable battery. This feature allows you to use it comfortably in environments without electricity.
Thanks to the wide and illuminated LCD screen of the digital scale, you can easily see your weighing values in low-light environments.
With the switch at the back of the scale, you can completely cut off the power to the device, and with the power button on the front, you can turn the device on and off.
You can control the device's charging status with the battery indicators on the device.
With the "T" button on the FLY 5000 digital precision scale, you can tare the scale. With this feature, you can easily weigh materials you cannot measure in a container.
You can change the measurement unit of the scale with the UNIT button. The units measured by the scale are g, ct, oz, lb, dwt, gn, dr, tlT, T, T/A/R.
You can set the calibration of the scale with the CAL button. You can perform the calibration process by giving a weight of 2000 grams to the scale.
With the "PCS" button on the scale, you can perform a counting operation by giving the device a sample example. Sample value ranges are 10-20-50-100-150-200-250-500 and 1000.
You can adjust it according to floor irregularities and make it stand balanced with the adjustable feet under the precision scale.
You can also check whether the scale is balanced with the water level on the front of the device.
FLY 5000 precision scale is not suitable for use in buying and selling transactions.
Counting Process Steps:
1 - Press the "PCS" button on the scale while it is on.
2 - Select a sample value entry number. You can change the sample value entry number with the "CAL" button. (Such as 10-20-50-100-150-200-250-500 and 1000)
3 - Add a sample example to the scale's pan as much as the value you entered.
4 - When you press the "PCS" button again, the scale will start the count increment process. As you start adding the same sample onto the pan, the value on the screen will change.
Weighing Capacity: 5 kg
Weighing Precision: 0.01 gram
Minimum Weighing: 0.2 gram
Tray Size : 17 x 14 cm
Calibration: External calibration
Display: LCD
Tare Function: Yes
Battery: Yes
Zeroing Feature: Yes
Weighing Units : g, ct, oz, lb, dwt, gn, dr, tlT, T, T/A/R
Scale Size: 22 x 30 x 10 cm
Scale Weight: 2.115 kg
Power Source: 12V adapter (built-in battery)
