Out Of Stock
Notify me when its in stockAT8800L provides flammable gas detection. It is an excellent detector for identifying known leaks, checking for leaks, and ensuring necessary safety measures.
These devices are used for safety purposes, especially in environments where flammable gases like natural gas, propane, and butane are present.
When a gas leak is detected, the device emits an audible alarm, and the warning lights on the scale start to rise according to the amount of leakage.
The sensitivity level can be adjusted from the Sensitivity setting on the side of the device.
It is a device used to ensure various controls such as inspections of all types of flammable gas pipelines, propane gas filling stations, and pipeline leak inspections in fuel facilities.
The AT8800L detector is not used to measure leakage levels in a normal environment but is used to pinpoint the leakage point in known areas in detail.
The power on button is used to turn on the device. After each initial start-up, the device calibrates itself for a while. After calibration, the sensor is moved over areas that may have gas leakage in the area to be detected. The device notifies gas leakage with audible and visual alarms.
The gases it responds to are types of flammable gases with combustion properties.
The box contents of the device include; 1 AT8800L detector, user manual, and 1 cloth carrying case.
TECHNICAL SPECIFICATIONS
Response Time: Very fast, instantaneous
Probe Length: 28 cm with the sensor at the end
Indicator: Light level scale indicator that can increase or decrease
Operating Temperature: 0 . . . +50 degrees
Sensitivity: 50 ppm methane
Dimensions: 159 x 65 x 32 mm
Weight: 186 gr
Power Source: 2 pieces of 1.5V AAA battery
Audible Alarm: Available
Battery Life: 9 hours continuous operation
Warming Time: Less than 20 seconds
Detector Sensor Head Diameter: 19.15 mm
