Epinox San-05 Cream Siphon, 500 ml

SET CONTENT

• Aluminum bottle
  
• Aluminum Cap
• 3-piece decoration nozzle
• Cleaning brush for decoration nozzles
• Protective cap
• Tube holder

INSTRUCTIONS FOR USE

• If you are using the cream siphon for the first time or after a long period, wash the bottle first with warm, then cold water.
  
• Fill the bottle with well-chilled fresh cream or other ingredients depending on your recipe. Do not fill the bottle beyond the indicated capacity on the bottle. To prevent clumping, ensure that the solid ingredients in the mixture are completely dissolved before filling the bottle.
  
• Insert the gasket into the cap and screw the cap onto the bottle securely. If no thread is visible on the bottle, the cap is properly closed. Do not cross-thread.
• Place the cream tube (8g N2O) into the tube holder. It is recommended to use original tubes, but you can also use 8g N20 tubes standard in Liss or ISI.
• Screw the tube holder onto the valve until you hear a hissing sound. Use 1 tube for each filling. Shake the bottle upright four to five times. When using well-chilled light cream or another mixture, shake up to ten times, loosen the tube holder and tube. A slight hissing sound when loosening is normal. Remove the metal tube. These tubes can be used as scrap and are recyclable.
• For dispensing, hold the bottle upright with the decoration nozzle pointing downward. There should be about 1 cm distance between the nozzle and the surface where you will dispense the cream. Gently press the trigger, if the cream is not firm enough, shake the bottle once more. Do not shake again while continuing to use.

MAINTENANCE INSTRUCTIONS

• Do not use sharp or abrasive objects to clean the bottle.
  
• Do not place the cream siphon in the freezer or deep freezer.
• Do not expose the cream siphon to heat (stove, sun, microwave, etc.).
• Only open the cream siphon when the pressure is completely gone. Press the trigger until the hissing sound stops. 
• During cleaning, only remove parts specified in the maintenance instructions. 
• All parts can be easily assembled. Therefore, there is no need to use force.
• For your safety, do not lean over the product during operation.
• Clogging in the valve may occur due to filling the bottle with solid-containing materials. In such cases, follow this procedure: Do not try to remove the cap in any way! Place the bottle on the counter and wait for the contents to settle. Then cover the cap with a thick cloth and press the trigger several times until the gas is completely released. If you still cannot loosen the cap, contact the company from which you purchased the product.
• Warning: Use only original spare parts! Never use the product parts with other products or similar products from other manufacturers.
• Do not try to make modifications on the product.
  
• If possible, use original tubes.
• The siphon and tubes are pressurized products, care and caution should be exercised during use.
• Never use the product in a damaged condition.
  
• Store the siphon and tubes out of reach of children.
• The cream siphon can only be used for preparing cream and similar liquid products.
  
• Keep this instruction manual.