Out Of Stock
Notify me when its in stockThe TFA 31.1123 ST-490 infrared laser temperature meter can measure temperatures up to 1000°C and is equipped with dual lasers and a lighting lamp.
This device, capable of high-temperature measurements up to 1000°C, can be easily used in home, work, or heavy industry environments.
With the TFA 31.1123 infrared temperature measurement device, low (LAL) and high (HAL) alarms can be set for temperatures ranging from -60 to +1000 degrees.
You can switch between modes on the device using the Mode button.
The MAX mode shows the highest temperature you measured, and the MIN mode shows the lowest temperature you measured.
The DIF mode shows the temperature difference between the areas you scan with the device's laser light during measurement.
The AVG mode shows the average temperature of the areas you scan with the device's laser light during measurement.
The ST-490 infrared remote temperature meter device has a backlit LCD screen, allowing you to make measurements even in dark environments. It also has a lighting lamp at the front of the device.
With the °C->°F button, you can easily switch between the device's temperature measurement units.
With the Emis. button, you can increase or decrease the device's emissivity setting using the direction keys (Lock and °C->°F).
With the Lock button, you can put the device in continuous measurement mode.
By pressing the Lock button while the measurement trigger is pressed, you can turn the screen light on and off.
By pressing the °C->°F button while the measurement trigger is pressed, you can turn the laser light on and off.
Thanks to the automatic shutdown function on the temperature meter device, if you do not operate it for 60 seconds, the device will automatically turn off, thus saving battery.
You can get information about the device's battery status with the battery icon located at the top right of the screen.
You can connect the optional K-type probe you will purchase to the TFA 31.1123 ST-490 infrared temperature meter device using the slot located on the side of the device.
By switching to PRB mode from the Mode button, you can see the temperature value measured by the K-type probe. The K-type probe temperature measurement range is -60 to +1400 degrees.
TECHNICAL SPECIFICATIONS
Laser Temperature Measurement Range : -60 degrees ... +1000 degrees
Laser Temperature Sensitivity : ±2 degrees
Screen Resolution : 0.1 degree
Target Ratio : 50:1
Emissivity : 0.10 ... 1.00
Screen : LCD
Response Time : 1-2 seconds
Dimensions : 215 x 145 x 45 mm
Weight : 380 grams
Power Source : 2 AAA batteries
