Out Of Stock
Notify me when its in stockBy purchasing the 8361 conductivity meter and 8685 ph meter as a set, you can get an idea about the hardness and quality of the water, and find out whether the water is drinkable.
To have a 100% idea about the quality of the water; you need to know both the ph value and the conductivity value of the water exactly.
With the Conductivity (TDS) meter, you can get information about whether the water is soft or hard, and with the ph meter, you can get information about the acid-alkali value of the water.
For the water to be drinkable, the tds value should be a maximum of 120 ppm. The ph value should ideally be between 7 and 8.5 for drinking water.
It has a large LCD display for easy reading of measurements made with the device.
The device is protected against the harmful effects of water and is waterproof.
The T-AZ 8361 conductivity meter shows stable results every time.
The device responds instantly and quickly to the measurements made.
The device has an automatic temperature compensation feature.
The T-AZ 8361 conductivity meter is a device with a one-button automatic calibration feature.
Thanks to the automatic shutdown feature in the device, you save battery (After 20 Minutes).
The device has a reading stop (Hold) function to freeze the measurement you have made on the screen.
Selectable calibration values.
It has automatic calibration from 2 points (pH4, pH7).
It is waterproof.
It has a temperature compensation (ATC) feature.
The T-AZ 8685 includes an ATC (temperature sensor). The slightest change in temperature affects the accuracy of the reading results. Therefore, the electrode is compensated with a temperature sensor, and the change in temperature does not affect the ph measurement.
It has a dual screen to see the temperature and Ph values simultaneously (pH & temp).
It is developed using the European ElectroTechnical committee Standardization to protect electronic equipment and shield it from environmental effects.
°C & F values are changeable.
It has a low battery indicator.
Water and dustproof.
Automatic Calibration with a single touch.
Replaceable °C & °F.
Ability to see pH and temperature values simultaneously.
Large screen.
It has a Data & ATC Hold Button.
Automatic power off.
Pen size, small enough to fit in a pocket.
Easily Replaceable Battery (LR44).
High-quality and accurate test results are guaranteed.
Manufactured under strict quality and safety standards.
TECHNICAL SPECIFICATIONS
pH Measurement Range: 0.0 – 14.0 pH
pH Accuracy: ± 0.2 pH
pH Resolution: 0.1 pH
pH Calibration: Calibration can be performed at 2 points (pH4, pH7)
Conductivity Measurement Range: 0 ~ 1999 µS / 0 ~ 19.99 mS
Conductivity Accuracy: ± %1 F.S
